26 dividers for 7th citadel. 0.8mm thick. Suggest 4 layers of .2mm
Printed reverse so the final finish was my textured bed instead of the normal strip line on top (will still have strip line on glass plate I guess).
| 7th_citadel.stl | 108.7KB | |
| 7th_citadel_1.stl | 121.9KB | |
| 7th_citadel_10.stl | 180.6KB | |
| 7th_citadel_11.stl | 64.7KB | |
| 7th_citadel_12.stl | 110.8KB | |
| 7th_citadel_13.stl | 46.8KB | |
| 7th_citadel_14.stl | 140.0KB | |
| 7th_citadel_15.stl | 72.9KB | |
| 7th_citadel_16.stl | 104.9KB | |
| 7th_citadel_17.stl | 54.8KB | |
| 7th_citadel_18.stl | 191.3KB | |
| 7th_citadel_19.stl | 87.4KB | |
| 7th_citadel_2.stl | 161.9KB | |
| 7th_citadel_20.stl | 69.1KB | |
| 7th_citadel_21.stl | 69.3KB | |
| 7th_citadel_22.stl | 51.3KB | |
| 7th_citadel_23.stl | 75.2KB | |
| 7th_citadel_24.stl | 57.1KB | |
| 7th_citadel_25.stl | 85.6KB | |
| 7th_citadel_3.stl | 115.0KB | |
| 7th_citadel_4.stl | 76.3KB | |
| 7th_citadel_5.stl | 150.1KB | |
| 7th_citadel_6.stl | 59.4KB | |
| 7th_citadel_7.stl | 141.2KB | |
| 7th_citadel_8.stl | 67.5KB | |
| 7th_citadel_9.stl | 56.6KB |
