7mm Nut Driver For “RC Snow Tracks – No Hardware” Or Any RC Wheel Nuts 3D Printer Model
The file '7mm Nut Driver For “RC Snow Tracks – No Hardware” Or Any RC Wheel Nuts 3D Printer Model' is (STL) file type, size is 116.5KB.
The file '7mm Nut Driver For “RC Snow Tracks – No Hardware” Or Any RC Wheel Nuts 3D Printer Model' is (STL) file type, size is 116.5KB.
After printing the "RC Snow Tracks - No Hardware" I realized my standard 1/4" drive 7mm socket was too large to fit in the drive wheel to tighten the wheel nuts so I created this printable version. Print vortically if you can (no supports) with a raft or brim. If you don't have good bed adhesion, print at a 45° with 40° supports (touching bed only), using 4+ walls. Printed in PLA, PETG may not be stiff enough for this.
| 7mm_Nut_Driver.STL | 308.6KB |
