76mm Prop For BabyApeProV2 Version7 3D Printer Model
The file '76mm Prop For BabyApeProV2 Version7 3D Printer Model' is (stl) file type, size is 1.0MB.
The file '76mm Prop For BabyApeProV2 Version7 3D Printer Model' is (stl) file type, size is 1.0MB.
This is a propeller for drones with a rotating diameter of 76mm (3 inches) and a shaft diameter of 1.5mm.
The target model is assumed to be Darwinfpv Baby Ape Pro V2.
When properly polished and flown at a leisurely pace, this propeller appears to last approximately 5%-15% longer in flight than the 3016.
Additionally, this propeller is lighter than the 3016 model.
There is an error in the STL file; however, it does not pose a problem for 3D printing.
Recommendation:
Printer: FDM
Filament: PC
Use heat-resistant materials; otherwise, the propeller may detach during flight.
Caution:
After printing, sand firmly.
To properly fit this propeller onto the motor shaft, re-drill the hole cleanly using a drill with a diameter of 1.45 mm.
| 20240831_76mm_v07.2.stl | 2.3MB |
