76mm Prop For BabyApeProV2 Version3.0 3D Printer Model
The file '76mm Prop For BabyApeProV2 Version3.0 3D Printer Model' is (stl) file type, size is 384.0KB.
The file '76mm Prop For BabyApeProV2 Version3.0 3D Printer Model' is (stl) file type, size is 384.0KB.
This is a propeller for drones with a rotating diameter of 76mm (3 inches) and a shaft diameter of 1.5mm.
Airfoil is NACA 6212.
The target model is assumed to be Darwinfpv Baby Ape Pro V2. It is at least as good as the commercially available 3016-3 in the low RPM range.
It seems to be quite inefficient at high speeds; compared to the 3016, the actual measured flight time is 30% less. Please consider this as a test only.
Recommendation:
Printer: FDM
Filament: PC
Use heat-resistant materials; otherwise, the propeller may detach during flight.
Caution:
After printing, file the propeller to clean it.
Also, use a drill with a diameter of 1.45 mm to prepare the axis of rotation.
| 20240809_76mm_V03.stl | 961.6KB |
