75mm Hydroponics Pot 3D Printer Model
The file '75mm Hydroponics Pot 3D Printer Model' is (f3d,stl) file type, size is 936.4KB.
The file '75mm Hydroponics Pot 3D Printer Model' is (f3d,stl) file type, size is 936.4KB.
As my vegetable garden slowly evolves I like to try new (to me) techniques and ideas. Something I've been thinking about for a while is Hydroponics.
Having scoured the internet for information I decided my best introduction would be a "gutter and bucket" setup as I already have pretty much everything I need, except for net pots and float valves.
The first step was acquiring some net pots, there are lots available from Amazon and the like, and some 3D printable designs, some found here on Thingiverse. However, I wanted a size that matched one of my hole saws so it was back to the drawing board - well Fusion 360...
The model as presented here is fractionally under 75mm in diameter just under the rim. However, if you are a Fusion 360 user, you can download the archive and "fiddle" with the numbers (MODIFY > Change Parameters) to create any reasonable size you require.
| 75mm_hydroponics_pot.f3d | 833.3KB | |
| 75mm_hydroponics_pot.stl | 482.6KB |
