The file '75cm Wind-Power-Plant As Desk Fan 3D Printer Model' is (SLDPRT,STEP,STL,SLDASM) file type, size is 4.3MB.
75cm high wind-mill model with motor
works great as indoor fan with an gear motor
I used a maxon 24V gearmotor with Dia22mm and 4mm shaft
In my version all printed in PLA without support
fits within a 19cm x 19cm print bed (diagonally)
(I mounted the blades with the straight side to the back, to use it a desk fan)
Gearmotor is just pressed in, Rotor also just pressed on shaft by hand
I included the Solidworks and Step-Files, if you want to change something.
Works probably also as scenery for H0 scale, I added a small door in the tower. Pole height on H0 would be ~44m
Have fun,
Sebastian
| Enclosure.SLDPRT | 266.5KB | |
| Enclosure.STEP | 315.3KB | |
| Enclosure.STL | 90.0KB | |
| Enclosure_Cap.SLDPRT | 577.6KB | |
| Enclosure_Cap.STEP | 1.6MB | |
| Enclosure_Cap.STL | 648.8KB | |
| Hub.SLDPRT | 291.4KB | |
| Hub.STEP | 297.2KB | |
| Hub.STL | 118.8KB | |
| HubCap.SLDPRT | 153.7KB | |
| HubCap.STEP | 168.3KB | |
| HubCap.STL | 154.4KB | |
| HubCap_Nose.SLDPRT | 65.0KB | |
| HubCap_Nose.STEP | 24.4KB | |
| HubCap_Nose.STL | 77.4KB | |
| HubCap_Pin.SLDPRT | 64.4KB | |
| Maxon_GearMotor.SLDPRT | 98.7KB | |
| Maxon_GearMotor.STEP | 70.5KB | |
| Pole_Bottom.SLDPRT | 288.5KB | |
| Pole_Bottom.STEP | 258.9KB | |
| Pole_Bottom.STL | 74.4KB | |
| Pole_Top.SLDPRT | 179.8KB | |
| Pole_Top.STEP | 92.5KB | |
| Pole_Top.STL | 108.7KB | |
| Rotor.SLDPRT | 116.0KB | |
| Rotor.STEP | 116.1KB | |
| Rotor.STL | 17.7KB | |
| WindMill.SLDASM | 423.9KB | |
| WindMillcomplete.STEP | 3.4MB | |
| WingBlade.SLDPRT | 267.6KB | |
| WingBlade.STEP | 468.9KB | |
| WingBlade.STL | 190.4KB |
