Found the 540 electric turbocharger/supercharger by Truglodite to be super cool. After running it I wanted more and may have gotten carried away. This is a work in progress but I have a functional one running a traxxas 775 on 4s from my summit. This motor is enough but brushless on a 6s would be something to see. I printed this at various settings both with .4 and .6 nozzles with silk and pla+. Surprisingly enough, I have yet to have a wheel explode. Expect some rubbing when you first get it going. I recommend leaving the outer housing slightly loose and run it, then tighten it down fully once bed-in. Have fun and be safe! 3s on a 3600kv is 40k rpm before resistance.
| 170_turbo_compressor_wheel_v3_1.stl | 696.7KB | |
| 72mm_compressor_housing_1.stl | 3.5MB | |
| v3_turbo_lower_170_rev_2.stl | 623.2KB |
