I needed an organizer so that I could put the base game and the Babel expansion in one box. I found the one I remixed that was designed for all expansions. I noted several comments that said that it didn't quite fit their box - slightly too large. When I measured, I found that it was about 3 mm too long in one direction - the direction of the long player board and Armada trays. We'll call that the y-axis.
So, by making thiner walls in several of the trays, I was able to cut 3-5 mm off of the trays in the y-axis and now it fits my box. I also had to cut the 2 long trays into 2 parts to be able to print them on my Creality K1. They were too big for my build plate.
Here are the changes I made from the original
-Player board and Armada trays are 3-5 mm shorter
-Player board and Armada trays have a 2-part version to be able to print on a smaller print bed
-Armada token tray, 7 Wonders token tray, Babel token tray, and Bable tiles tray are all 3-5 mm shorter
-Coin trays are 4 separate trays with lids
You'll need to print 4 card trays and lids.
I don't have all of the expansions, so I can't confirm that everything fits in them like it should. I don't think I changed anything that would make a component not fit, but it's possible.
The card tray still needs improvement. There is only one section that is big enough to fit all of the cards from a single age without really forcing the cards in.
| 7_Wonders-Armada-part_1.stl | 143.4KB | |
| 7_Wonders-Armada-part_2.stl | 7.3KB | |
| 7_Wonders-Armada.stl | 138.6KB | |
| 7_Wonders-Armada_Tokens.stl | 61.8KB | |
| 7_Wonders-Babel_1.stl | 148.1KB | |
| 7_Wonders-Babel_2.stl | 133.1KB | |
| 7_Wonders-Coins_-_cover.stl | 232.3KB | |
| 7_Wonders-Coins_-_tray.stl | 1.6MB | |
| 7_Wonders-Player_Boards-large_part.stl | 102.0KB | |
| 7_Wonders-Player_Boards-small_part.stl | 18.3KB | |
| 7_Wonders-Player_Boards.stl | 107.1KB | |
| 7_Wonders-Tokens.stl | 444.8KB |
