This is an enclosure for the Hosyond 7-in HDMI display (Display-H) (https://www.amazon.com/dp/B0BKGCB18T?ref=ppx_yo2ov_dt_b_product_details&th=1) which mounts the Raspberry Pi on the back. It may fit other displays as well. Original by mastamoon was a nice start, so I added accommodations for the mounted RPi as well as a bezel and stand. The screen mounts on the main case with M2.5-10 screws and the bezel is a friction fit. Note that the bezel is a friction fit to the display; the assembly is then mounted to the case with the screws. If the bezel fit is too tight, reprint the bezel with 5% increase in size, it's easy to do & you don't have to reprint the case.
The original feet can be mounted on the back with M3-20 screws, and for added security a nut can be fitted on the inside - Note that due to the weight of the screen, the original feet result in front heaviness with a tendency to fall forward. I therefore included a set of extended feet that will negate the problem. For these feet you'll need M3-14 screws, and again the nuts are recommended. The small cutout above the RPi USB ports is for a USB-C extension to provide power to the whole thing via the Pi (https://www.amazon.com/gp/product/B086W2LTGY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1)
I have 3 of these screens set up for Klipper operation, and have had no QC issues so far. See what you think.
| Enclosure_Feet.stl | 24.7KB | |
| inch_Display_Bezel.stl | 23.2KB | |
| in_Display_Enclosure.stl | 338.5KB |
![Vinyl Record Stand [8 LP] 3D Printer Model](https://cdn.3axis.co/assets/dd/71/9e/ce/dd719ece-a9bf-4620-8929-92a277e67405/images/b585ad56-bdd3-4763-ae3c-5718b005fe8f_thumb.jpg)
