The inspiration was the Jron2008's WhoopDegen case (https://www.thingiverse.com/thing:6572641), but it was too big for my taste.
But then I found the CH26's design (https://www.thingiverse.com/thing:6734248), but it was for 75mm, so I decided to try to dig around and resize it myself.
I resized the case to fit a 65mm whoop, changed the LiPo system to fit a 12 LiPo, and shrunk the two side "boxes". Also I've removed holes that CH26's design had.
Quoting CH26 - "The latches and hinges are held in place with 20mm M3 screws. You need 8 screws in total."
EDIT:
I've remixed ledoc95 latch design, (https://www.thingiverse.com/thing:4142209). It has longer "handle", but still pretty hard to open the box. So I made it lil bit longer.
If I find time I will try to make the case even smaller and put the LiPo under/above (with some kind of shelf?) whoop.
I''ll try to keep you updated
(3mf file included, so go wild)
(Also also, I attached hinges files from CH26's thing)
| Frog_Box_65mm_whoop.3mf | 1.1MB | |
| Frog_Box_65mm_whoop_case.stl | 1.8MB | |
| Frog_Box_65mm_whoop_lid.stl | 1.4MB | |
| hinge.stl | 516.2KB | |
| hinge_looser.stl | 805.5KB | |
| hinge_single_axis.stl | 766.5KB | |
| latch_arm_longer_handle.stl | 55.7KB | |
| latch_arm_v2.stl | 743.0KB | |
| latch_cam_v2.stl | 130.7KB |
