The 60percent is a 60% keyboard with Bluetooth (BLE) powered by ZMK. Below, you can find a full list of required parts you will need to complete this keyboard. On my Github you will find links that I personally used to purchase these parts. I am not affiliated with any of the links.
If you're new to handwiring a keyboard, it really isn't too bad, trust me! I hope this keyboard can start you on a journey to finding a keyboard that perfectly fits your needs.
Are you looking for a macropad?
Required Parts
| Part | Qty | Description |
|---|---|---|
| Challenger 840 BLE | 1 | Micro controller board with Bluetooth LE |
| MX-style switches of your choosing | 60 | I used Outemu Lemon/Limes. |
| 1N4148 Diodes | 60 | You need these for handwiring |
| Keycaps | 1 set | You will need a 7u spacebar in the set |
| Cherry stabilizers | 1 set | Requires 1 x 7u and 2 x 2u |
| Wires | - | I used wrapping wires |
| M2 x 6mm hex female-to-female brass standoff (spacer) | 5 | This is what supports/holds down the plate and the case together |
| M2 x 12mm countersunk screws | 2 | Case-side that goes with the brass standoff |
| M2 x 10mm countersunk screws | 3 | Case-side that goes with the brass standoff |
| M2 x 6mm flat top screws | 5 | Plate-side that goes with the brass standoff |
| M2 x 6mm countersunk screws | 4 | Holds the MCU down |
| M2 hex nut | 4 | Holds the MCU down |
| 3.7v LiPo Battery | 1 | You'll have to source this locally, as batteries aren't shipped overseas usually |
| JST 2.0 PH Connector | 1 | Required if the battery doesn't come with compatible connection |
| tokyo60-case_v4.stl | 719.9KB | |
| tokyo60-plate_v3.stl | 355.6KB |
![[OUTDATED] Simple Universal Midi Controller Stand 3D Printer Model](https://cdn.3axis.co/assets/a9/0a/8f/bc/a90a8fbc-cf10-4fc6-b3a7-8634a6a56c99/images/cdf284b9-7922-41b4-8813-06103664fc9c_thumb.jpg)
