60ml Paint Bottle Rack 3D Printer Model
The file '60ml Paint Bottle Rack 3D Printer Model' is (stl) file type, size is 2.7MB.
The file '60ml Paint Bottle Rack 3D Printer Model' is (stl) file type, size is 2.7MB.
A rack for 60ml paint bottles - optionally you can also store some brushes in the gaps between the bottles.
Note: The bottle holes are 35mm in diameter - 60ml bottles are usually slightly smaller than this, but make sure they fit before printing.
There are many sizes available:
2x4, 4x2, 2x6, 4x3, 3x4, 3x6, 4x4, 4x6 (The 2x6, 3x6, 4x6 model requires a 256mm width buildplate.)
All models are designed to not have any angles that exceed 45 degrees, so no supports are needed to print.
Enjoy.
If you really enjoy my design and want to support me, you can buy me a coffee!
https://ko-fi.com/kdesigns101
| Paint+Brush_Holder_2x4.stl | 828.6KB | |
| Paint+Brush_Holder_2x6.stl | 1000.5KB | |
| Paint+Brush_Holder_3x4.stl | 1.2MB | |
| Paint+Brush_Holder_3x6.stl | 1.5MB | |
| Paint+Brush_Holder_4x2.stl | 835.3KB | |
| Paint+Brush_Holder_4x3.stl | 1.2MB | |
| Paint+Brush_Holder_4x4.stl | 1.5MB | |
| Paint+Brush_Holder_4x6.stl | 2.1MB |
