This is v2 of the first wrist rest I made. It is slightly slimmer/shorter, so it's not so large, but it's the same width. You can also add feet to raise the back by 4mm (I'll likely add more options for different heights); for now without the lift, it's perfect height for a frog mini, and with the lift it's comfortable for the Fjell, Salvation, Viktus Sinne, etc.
Depending on your printer/filament you may need to adjust the tolerances between the friction fit pieces.
For me, 2 brands of PLA print differently and I had to offset the dovetail keys by 0.1mm for one of the brands.
Again, like v1, the cutouts are for adhesive silicone sheets I've cut into 1" x 4mm strips to act as feet and bumper for protection against the keyboard.
Print upside down, so you get plate texture or smoothness on the top surface. In my case I used BambuLab's smooth PEI plate and the wrist rest is buttery smooth.
Have fun, enjoy!
UPDATE: I added files for a 65%
UPDATE2: I added a file for TKL (modeled to fit the Cycle7)
| 4mm-lift-left.stl | 533.1KB | |
| 4mm-lift-right.stl | 532.7KB | |
| 65percent-4mm-lift-left.stl | 555.6KB | |
| 65percent-4mm-lift-right.stl | 556.1KB | |
| 65percent-left.stl | 1.6MB | |
| 65percent-right.stl | 1.6MB | |
| dovetail-key.stl | 657.0KB | |
| left.stl | 1.6MB | |
| right.stl | 1.6MB | |
| splayed-dovetail-key.stl | 804.3KB | |
| TKL-right.stl | 1.7MB |
![BAF (Big Ass [Plate] Fork) 10 Slot MX Plate Fork For Mechanical Keyboards Rev 2 3D Printer Model](https://res.3axis.co/632e1277-6b22-43c1-bddf-1fc88d0d1279/images/371c3c19-7bba-40b9-8656-4795e3dbe5db_thumb.jpg)
