6 Speed Allison Automatic Transmission / Gearbox 3D Printer Model
The file '6 Speed Allison Automatic Transmission / Gearbox 3D Printer Model' is (STL,stl) file type, size is 7.1MB.
The file '6 Speed Allison Automatic Transmission / Gearbox 3D Printer Model' is (STL,stl) file type, size is 7.1MB.
This model is base on the Allison 1000 automatic transmission. Is not an exact replica but the basic design and functionality are the same. The most significant difference from the real transmission is the C1 and C2 clutches that I design to work with 3D printed parts and solenoids.
Assembly video: https://www.youtube.com/watch?v=vvhICaIRjOY
Gear ratios:
1st: 3.20
2nd: 1.86
3rd: 1.43
4th: 1
5th: 0.70
6th: 0.60
R: 4.41
I made the lower part of the case quite big so there's room to put solenoids to engage all the clutches and even a parking pawl to control them with switches or even change gears automatically with something like Arduino.
The selector 3D model is here: http://www.thingiverse.com/thing:1214373
For more information about how to make the electrical part to control the solenoids, go to my project page where I show the circuit diagram and arduino sketches: https://interlinkknight.wixsite.com/interlinkknight/automatic-transmission
There is also an adapter to fit this transmission to the Toyota 4 Cylinder 22RE Engine made by ericthepoolboy. This is the adapter: http://www.thingiverse.com/thing:1120974
I don't have a 3D printer so I would appreciate any feedback from people that printed one to improve the model. Still, I check all parts on Cura to make sure all is ready to print, except the orientation. You will have to rotate some parts to print it in the optimum way to have the least overhanging and warp.
A special thanks to the user RobinSwa for helping me improve the model by testing it and giving me useful feedback.
| C-Clip.STL | 14.9KB | |
| C1_Clutch_x1.stl | 171.6KB | |
| C1_Fork_Extension_x1.stl | 50.5KB | |
| C1_Fork_x1.stl | 330.1KB | |
| C1_Slider_x1.stl | 467.9KB | |
| C2_Clutch_x1.stl | 213.7KB | |
| C2_Fork_Extension_x1.stl | 31.1KB | |
| C2_Fork_x1.stl | 340.8KB | |
| C2_Slider_x1.stl | 503.2KB | |
| C3_Clutch_x1.stl | 132.4KB | |
| C4_Clutch_x1.stl | 120.8KB | |
| C5_Clutch_x1.stl | 106.3KB | |
| Case_x1.stl | 4.8MB | |
| Dipstick_x1.stl | 4.9MB | |
| Front_Cover_x1.stl | 480.4KB | |
| Input_x1.stl | 239.5KB | |
| Oil_Pan_x1.stl | 147.6KB | |
| Output_-_P3_Carrier_x1.stl | 453.8KB | |
| P1_Carrier_-_P2_Ring_x1.stl | 1.2MB | |
| P1_Planet_x4.stl | 174.3KB | |
| P1_Ring_x1.stl | 970.2KB | |
| P1_Sun_x1.stl | 725.6KB | |
| P2_Carrier_-_P3_Ring_x1.stl | 1.2MB | |
| P2_Planet_x4.stl | 184.3KB | |
| P2_Sun_-_P3_Sun_x1.stl | 577.2KB | |
| P3_Planet_x4.stl | 188.4KB | |
| Parking_Pawl_x1.stl | 83.8KB | |
| Top_Cover_x1.stl | 642.0KB |
