5D20 Tricorder 3.0 – The Al Spader Variant. 3D Printer Model
The file '5D20 Tricorder 3.0 – The Al Spader Variant. 3D Printer Model' is (stl) file type, size is 4.0MB.
The file '5D20 Tricorder 3.0 – The Al Spader Variant. 3D Printer Model' is (stl) file type, size is 4.0MB.
This is a further development of the other 5D20 Dice Tricorder on my page. This has now been modified to include a removable end cap that can house up to 18 3mm x 25mm tokens.
As with the other version, it's designed to hold five standard sized D20's which are usually around 20mm in diameter, measured face to face as opposed to point to point.
NOTE: Some of the official Modiphius dice such as the Klingon and Kirk Tunic dice are up to 22mm in diameter and so it's worth measuring the dice before you print.
A simple solution for 22mm dice is to print the Tricoder at 110% which will make the sockets large enough to accomodate 22mm dice.
The magnet sockets are designed to hold magnets that are 6mm in diameter and 3mm thick. These are pretty standard and easy to find, I think.
The whole thing was modified in Blender and the test print done on a Creality Ender 3 Pro.
I've put both versions up because some folk expressed a preference for the version without the removable end cap.
| 5D20_Base_Hollow.stl | 1.6MB | |
| 5D20_Endcap.stl | 6.6MB | |
| 5D20_Lid.stl | 1.3MB |
