5:1 ratio ogive nosecone designed to fit a tube with an OD:41.6mm and ID:40.5mm.
The nosecone has been split into 3 separate parts so that it can be printed on a small print bed. The nosecone is two parts with a maximum hight of 120mm with the shoulder printed separately.
The shoulder has been separated from the main nosecone so that a plywood bulkhead can be installed from the inside before it is glued to the rest of the nosecone.
All the parts have been drawn with a wall thickness of 1.5mm.
I have included files for all the parts separately, as well a file that has all 3 parts laid out ready to print.
| nosecone_full_assembly_to_print.stl | 2.6MB | |
| nosecone_Part_1.stl | 392.2KB | |
| nosecone_Part_2_.stl | 1.0MB | |
| nosecone_part_3.stl | 706.1KB |
