I needed a simple nozzle for my 5015 blower so I designed a really simple one. It is mounted with a single screw.
I´ve prepared four different versions:
Wide: Outlet size is about the same as the inlet size for maximum air flow over a wide area
Medium: Smaller
Narrow: Smallest ;)
Update 24 Sept 2017
Narrow-long: This version is 15mm longer than the original narrow version
Best printed without supports and the nozzle tip pointing down.
FreeCAD source files included.
Parts list:
1 x printed blower nozzle of your choice
1 x 12V 5015 Blower fan e. g. from Aliexpress
1 x M3 x 20mm bolt e. g. from Aliexpress
1 x M3 nut e. g. from Aliexpress
| Blower_nozzle_medium.stl | 71.3KB | |
| Blower_nozzle_narrow.stl | 58.7KB | |
| Blower_nozzle_wide.stl | 96.6KB | |
| Long_narrow_blower_nozzle.FCStd | 592.5KB | |
| Long_narrow_nozzle.stl | 53.6KB | |
| Medium_blower_nozzle.FCStd | 807.4KB | |
| Narrow_blower_nozzle.FCStd | 1.1MB | |
| Wide_blower_nozzle.FCStd | 899.2KB |
