5.25″ To 3.5″ Mount For (2-10) HDD Caddy Trays – V3 3D Printer Model
The file '5.25″ To 3.5″ Mount For (2-10) HDD Caddy Trays – V3 3D Printer Model' is (stl) file type, size is 2.9MB.
The file '5.25″ To 3.5″ Mount For (2-10) HDD Caddy Trays – V3 3D Printer Model' is (stl) file type, size is 2.9MB.
2.5"/3.5" SSD/HDD TO 5.25" CD-ROM BAY OR TRAYS AND ENCLOSURE.
Version 3
All previous trays ARE compatible, but will still try to slide in too far.
v3 Trays ARE NOT backwards compatible.
EVEN EASIER TO PRINT, STRONGER
Trays AND Tracks have been modified.
Now they LATCH and can't be pushed too far into the enclosure.
Can be put screws from the OUTSIDE for easier assembly.
Sides ONLY for 3.5" HDD has been added
Number of Drives 2-10 (Can easily be modified for more if required)
Optional Addon: INDEPENDENT STAND added
Added M3 self-tapping hole in both ends for future optional add-ons like 120mm fan support, also a spot for a nut if required
HARDWARE REQUIREMENTS
INDEPENDENT STAND
M3 by (6-10)mm OR M3 by (12+)mm with nut
Screws Required 8-16 but suggest 16
OPTIONAL: feet/standoffs (x4)
The original basic standoff was not modified, but uploaded for convenience.
SUPPORT REQUIRED FOR HDD-REVERSABLE-TRAYS & CADDY RAILONLY (SUPPORT ON BASEPLATE ONLY)
STILL IN DESIGN STAGE:
FAN(S) FOR FRONT/BACK OF ENCLOSURE
STANDOFF FOR FAN(S)
OPTIONAL FEET
STAND-OFF FOR EASIER MOUNTING
ANY SUGGESTIONS?
| V3-MAIN_SIDES_HOLDER_x10.stl | 8.1MB | |
| V3-MAIN_SIDES_HOLDER_x2.stl | 1.4MB | |
| V3-MAIN_SIDES_HOLDER_x3.stl | 2.2MB | |
| V3-MAIN_SIDES_HOLDER_x4.stl | 3.1MB | |
| V3-MAIN_SIDES_HOLDER_x5.stl | 3.9MB | |
| V3-MAIN_SIDES_HOLDER_x6.stl | 4.7MB | |
| V3-MAIN_SIDES_HOLDER_x7.stl | 5.6MB | |
| V3-MAIN_SIDES_HOLDER_x8.stl | 6.4MB | |
| V3-MAIN_SIDES_HOLDER_x9.stl | 7.2MB |
