4X5 Ground Glass Holder 3D Printer Model
The file '4X5 Ground Glass Holder 3D Printer Model' is (STL) file type, size is 17.1KB.
The file '4X5 Ground Glass Holder 3D Printer Model' is (STL) file type, size is 17.1KB.
This is a 4X5 ground glass holder for large format cameras.
It has the same dimension as a regular film holder and is used the same way.
The strip is glued in the slot and keeps it from sliding out acidentily.
It's made for 4mm thick frosted glass.
You will need:
4 countersunk M4x10
4 M4 nuts
Glue
| 4x5_Ground_glass_bezel.STL | 47.3KB | |
| 4x5_Ground_glass_holder.STL | 42.6KB | |
| 4x5_Ground_glass_stop.STL | 4.8KB |
