4x Decora Switch Cover Or Outlet Cover – XXL Coverage 3D Printer Model
The file '4x Decora Switch Cover Or Outlet Cover – XXL Coverage 3D Printer Model' is (step,stl) file type, size is 347.2KB.
The file '4x Decora Switch Cover Or Outlet Cover – XXL Coverage 3D Printer Model' is (step,stl) file type, size is 347.2KB.
An XXL switch or outlet cover, for all those times when you measure once and cut twice then don't want to patch drywall and your wife spends the next 7 years reminding you about the ugly hole in the wall behind the AV cabinet that nobody can see unless they get right up on it and look behind it but the XL at the hardware stores don't quite cover the bottom right of the hole. Well. Be complained at no more. You're welcome.
STL and STEP files included.
It's 235mm across so if your print bed is too small to print it face down then stand it up one of its edges, give it a small brim to hang on, then paint manual supports across each of the overhangs to give it extra anchoring. And of course to support the overhangs from printing on its edge. Finest layer lines you can print if you do it standing up on its edge. That's what I did and it came out great.
I guess you could also chop it in half in the slicer considering there are plenty of screw holes to keep it trued but that kind of defeats the purpose of printing this to make an ugly thing pretty.
| 4x_Decora_Switch_Cover_XXL_v4.step | 1.3MB | |
| 4x_Decora_Switch_Cover_XXL_v4.stl | 756.1KB |
