45 ACP Valve Stem Cap – Automotive Schrader 3D Printer Model

Author: @
License: CC BY-NC
File formats: stl
Download type: zip
Size:4.8MB

The file '45 ACP Valve Stem Cap – Automotive Schrader 3D Printer Model' is (stl) file type, size is 4.8MB.

Summary

UPDATE Jan 26, 2020: I had to increase the size of the 45ACP by 10% because it was to weak at the bottom rim. Uploaded a new file at 1:35pm MST.

These caps are designed to fit the ISO standard automotive valve stems used on most cars, light trucks and motorcycles.

Most should print without supports unless noted below.

Due to the properties of different filaments and temperatures, etc, I recommend printing one to make sure it fits properly. You may have to scale up/down a tad. My test prints with PLA+ fit nicely with no adjustments.

I recommend printing at .15 line height due to the 32tpi on the threads.

If you want to see all the valve stem caps I have remixed:
https://tinyurl.com/qnd82kz

I have designed over 500 remixes of various types. If you want to search by the type, visit my profile: https://www.thingiverse.com/ToaKamate/about

45ACP-Cap.stl 11.9MB