40mm Ubis 13(S) Fan Shroud 3D Printer Model
The file '40mm Ubis 13(S) Fan Shroud 3D Printer Model' is (f3d,gcode,stl) file type, size is 2.4MB.
The file '40mm Ubis 13(S) Fan Shroud 3D Printer Model' is (f3d,gcode,stl) file type, size is 2.4MB.
A fan shroud to direct air to the cooling fins on Printrbot's Ubis 13 or 13 S hotend for 40mm fans. It has been confirmed to fit on both hotends. The holes are self tapping - no need for nuts. The extended version is 10mm longer than the original version in case that helps with the fitting. The half extended version is 5mm longer.
| 40mm_Ubis_13_Fan_Shroud.f3d | 843.2KB | |
| 40mm_Ubis_13_Fan_Shroud.gcode | 1.1MB | |
| 40mm_Ubis_13_Fan_Shroud.stl | 4.0MB | |
| 40mm_Ubis_13_Fan_Shroud_Extended.stl | 3.8MB | |
| 40mm_Ubis_13_Fan_Shroud_Half_Extended.stl | 3.9MB |
