Name: 40mm to 30mm Fan adapter.
Version: R1
Dimensions: 40.3mm x 40.3mm x 26.07mm
Status: Complete
Last Update: Jan 22, 2016

http://GabLabs.ca

Update (Jan 22, 2016)

Ive finally got around to updating this design. The previous design has obvious design flaws that would restrict airflow. I have changed to a plate to plate cone chamfer design, to promote better airflow and have also reduced mount plate thickness to cut down print times & material usage. I've made available 6 different sizes in this new revision.

**Printed with pillar supports

Changes:
- Plate to Plate cone chamfer design (better airflow)
- Removed Inner ridges (better airflow)
- Halved mount plate thickness (reduce print time/less material)

Update (March 2015)

After multiple test prints, I've found it difficult to get a clean print due to unsupported over hangs, though i did manage to get a usable print. Additionally because of the design its difficult to mount the E3D v6 shroud as you lack space for your screw driver.

I will address these issues with a revision of the design soon.

Notes:
I designed this because I wanted more air flow to E3D V6 heat sink but didn't want to part with the injection molded shroud. So this bolts to it and allows you to mount a 40mm fan at the other end.

Next Revision will include:
- Thinner walls to maximize airflow
- Remove ridges on inside
- Thinner mount plates to reduce overall size