4″ Skylight Roof Window Air Conditioner Exhaust Adapter And 6″ To 2x 4″ Splitter 3D Printer Model
The file '4″ Skylight Roof Window Air Conditioner Exhaust Adapter And 6″ To 2x 4″ Splitter 3D Printer Model' is (stl) file type, size is 1.2MB.
The file '4″ Skylight Roof Window Air Conditioner Exhaust Adapter And 6″ To 2x 4″ Splitter 3D Printer Model' is (stl) file type, size is 1.2MB.
I created this adapter so that my roof window has to be opened as little as possible while using my air conditioning system.
I reduced the 6 inch hose of the air conditioning system to 2x4 inch (splitter_6to4) and then attached two 4 inch sleeves with the window adapter (adapter_window)
I recommend printing "adapter_window_long" for most skylight types.
Normally "splitter_6to4_short" is enough if you attach the hoses with tape like I did.
Printed in PETG to prevent deformation when exposed to sunlight.
Please post a Make :)
| adapter_window_long.stl | 1.1MB | |
| adapter_window_short.stl | 1.2MB | |
| splitter6to4_big.stl | 439.6KB | |
| splitter6to4_short.stl | 361.2KB |
