Print all parts in vase mode. Scale all parts to 9804.11% !!
I got the best results with 2mm layer hight on my e3dV6 0.7mm nozzle.
About 4/5 hours printing time If you increase the speed.
Base1.stl has to have 2 or 3 bottom layers. All the other parts not.
Just use glue on the inside of the parts to cement them together
The hole in the bottom is for home made rockets:
You can make rockets at home for these classic rockets. This design does not have a parachute. (You can add one) I will design one with parachute in the future.
DIY Homemade rocket:
https://www.youtube.com/watch?v=12fR9neVnS8
| FULL.stl | 369.7KB | |
| Part1.stl | 363.3KB | |
| Part2.stl | 62.8KB | |
| Part3.stl | 43.8KB | |
| Part4.stl | 26.4KB | |
| Rocket_Insert.stl | 34.4KB |
