4 Inch Speaker Array 3D Printer Model

Author: @
License: CC BY-NC
File formats: dxf,stl
Download type: zip
Size:14.5MB

The file '4 Inch Speaker Array 3D Printer Model' is (dxf,stl) file type, size is 14.5MB.

Description Files (11)

Summary

There are a lot of configuration options!!

Instructions:

  • Vaneer

    1. Use a laser or dragknife to cut the vaneer pieces with about a .2mm inset.
    2. Superglue the vaneer to the speakerbox.
    3. once the glue cures,, use a sander at 150 grit and be careful around the edges.
    4. Sand to 600 grit and hit the edges.
    5. oil / finish the vaneer.
    6. Continue to electronics
  • Wrap
    1. use a dragknife like a CriCut or Cameo to cut out the wrap. I used a leather repair patch.
    2. Apply pieces to the 3D print
    3. Cut off anything that didn't fit in the indented grooves.
    4. proceed to electronics

Electronics - See video

This will fit most 4" car speakers.
Here are some options:

JBL Stage 3427F
https://www.amazon.com/JBL-Stage3-Two-Way-Audio-Speakers/dp/B07P89J2GR/

Pyle
https://www.amazon.com/dp/B089QQSNDV

Here are some other parts:

Handle
https://www.amazon.com/Amerock-BP76312CS26D-Allison-Center-Center/dp/B004NJ26VK/

Bluetooth Radio (2 options)
https://www.aliexpress.us/item/3256805356301786.html?

Amplifier with EQ
https://www.aliexpress.us/item/3256804644200771.html

Power (5.5mm barrel plug)
https://www.aliexpress.us/item/3256804451073296.html

1/8" audio jack
https://www.amazon.com/dp/B01FWWV5U4

Speaker Screws
https://www.amazon.com/gp/product/B09LQRNTB8/

Feet:
https://www.amazon.com/dp/B07RJXP5TJ/

Clasps
https://www.amazon.com/gp/product/B075SXKXL2/

M3x10mm screws
https://www.amazon.com/dp/B09LYM899D/

Spring Terminals
https://www.amazon.com/PNGKNYOCN-Speaker-Terminal-Amplifier-Jointing/dp/B0B5GKQHKC

NL4 Seaker connectors
https://www.amazon.com/GLS-Audio-Speaker-Square-Rectangle/dp/B00YVC46QM/

BNC antenna connector
https://www.amazon.com/dp/B0C8FCZHH1

Bottom.dxf 65.4KB
Front.dxf 69.6KB
Left.dxf 58.7KB
Right.dxf 58.7KB
Top.dxf 61.7KB
_Vaneer_Electronics.stl 21.3MB
_Vaneer_Speakon_NL4.stl 17.2MB
_Vaneer_Spring_Terminals.stl 17.0MB
_Wrap_Electronics.stl 21.3MB
_Wrap_Speakon_NL4.stl 17.2MB
_Wrap_Sprimg_Terimals.stl 17.0MB

Tags

You might also like

Record Keepers 3D Printer Model
Record Keepers 3D Printer Model
FIMI X8 Se 2020 Propeller Protection 3D Printer Model
FIMI X8 Se 2020 Propeller Protection 3D Printer Model
Invisible Record Display 3D Printer Model
Invisible Record Display 3D Printer Model
Key Holder Dog 3D Printer Model
Key Holder Dog 3D Printer Model
LED Cube & Case 3D Printer Model
LED Cube & Case 3D Printer Model
Kallisti 45 RPM Adapter Spindle 3D Printer Model
Kallisti 45 RPM Adapter Spindle 3D Printer Model
Wash&Cure 3D Printer Model
Wash&Cure 3D Printer Model
Vinyl Album Holder 3D Printer Model
Vinyl Album Holder 3D Printer Model
Sculpfun S30 (Pro – Pro Max) Screw Improvement Kit 3D Printer Model
Sculpfun S30 (Pro – Pro Max) Screw Improvement Kit 3D Printer Model
Boat 3D Printer Model
Boat 3D Printer Model
Ear Guard 3D Printer Model
Ear Guard 3D Printer Model
Banggood 3.5w Laser Driver Mount 3D Printer Model
Banggood 3.5w Laser Driver Mount 3D Printer Model
Laser Engraver Lift Tower 3D Printer Model
Laser Engraver Lift Tower 3D Printer Model
Anclaje Tubos 3D Printer Model
Anclaje Tubos 3D Printer Model
Axial Scx10iii Cj7 Rear Sway Bar 3D Printer Model
Axial Scx10iii Cj7 Rear Sway Bar 3D Printer Model
Laser Mount For Anet A2 3D Printer Model
Laser Mount For Anet A2 3D Printer Model
Oven Stick 3D Printer Model
Oven Stick 3D Printer Model
Vinyl Record Collection – Register Tabs Separator 3D Printer Model
Vinyl Record Collection – Register Tabs Separator 3D Printer Model
ER11 Collets Set Organizer 3D Printer Model
ER11 Collets Set Organizer 3D Printer Model
15W Fixed Focus Laser Mount For 6550 Laser Engraver Cutter 3D Printer Model
15W Fixed Focus Laser Mount For 6550 Laser Engraver Cutter 3D Printer Model