4 Hook Coat Hook / Coat Rack / Tower Hooks 3D Printer Model
The file '4 Hook Coat Hook / Coat Rack / Tower Hooks 3D Printer Model' is (stl) file type, size is 58.7KB.
The file '4 Hook Coat Hook / Coat Rack / Tower Hooks 3D Printer Model' is (stl) file type, size is 58.7KB.
Took the single hook and did a 4 hook remix for the back of a door, on the wall inside a doorway for coats, on the backside of a cabinet door for dish towels...
The opportunities are endless! :)
Rev2 is 4 hooks with a rounded "peg" closing off the original mounting holes
Rev2.1 is 4 hooks with a rectangular filler covering up the original mount holes to fit more in with the squared design of the entire thing
Rev2.3 - Added additional screw holes and corrected spacing so no support is needed
I hope this is of use to someone!
My printer settings were 200c hot end and 60c bed but YMMV
Enjoy!!
| 4_Hook_Wall_Hooks_Rev2.1.stl | 95.5KB | |
| 4_Hook_Wall_Hooks_Rev2.3.stl | 76.7KB | |
| 4_Hook_Wall_Hooks_Rev2.stl | 96.1KB |
