4″-4 Nut And Bolt 3D Printer Model
The file '4″-4 Nut And Bolt 3D Printer Model' is (STEP,STL) file type, size is 21.4MB.
The file '4″-4 Nut And Bolt 3D Printer Model' is (STEP,STL) file type, size is 21.4MB.
A large nut and bolt. 4"-4UNC. Center of the bolt is hollowed out to save material.
This was designed in imperial units so if your slicing software shows it tiny then scale it up 2540%. The shorter bolt height should be 8.6875" (220.6625mm), the longer bolt should be 10.000" (254mm). The nut height should be 3.000" (76.2mm).
Fell free to post a make.
| Bolt_4-4_x_6.STEP | 20.5MB | |
| Bolt_4-4_x_6.STL | 7.9MB | |
| Bolt_4-4_x_8.STEP | 15.5MB | |
| Bolt_4-4_x_8.STL | 12.4MB | |
| Bolt_4-4_x_8_Solid.STEP | 15.4MB | |
| Bolt_4-4_x_8_Solid.STL | 7.4MB | |
| Nut_4-4.STEP | 2.8MB | |
| Nut_4-4.STL | 1.9MB | |
| Washer_4.STEP | 16.5KB | |
| Washer_4.STL | 261.8KB |
