PASSENGER SIDE: MIRROR FOR DRIVER SIDE
Replaces the little plastic clip that attaches the filler panel below the headlight to the fender.
Note that this is not a copy of the factory piece, and doesn't actually clip to the filler piece as the original did: put the nub into the hole on the end of the filler, and some strong double sided tape on the flat opposite the nub, then slip the clip over the metal of the fender, and press the tape firmly to the fender. This will hold the outside end of the filler piece in place, and the 10mm bolt at the inner end of the filler will secure it.
Factory part numbers: passenger side 52522B, driver side 52523A
The "screwinsert" file is the expanding piece that the 10mm screw goes into. I haven't had any luck finding a part number for this, and mine wouldn't stay tight in the metal, so I came up with this from PETG and it's working so far.
| HeadlightTrimClipPassenger.stl | 4.3KB | |
| ScrewInsert.stl | 11.8KB |
