3FUN 3″ 3inch FPV Drone Frame And Canopy (naked Nebula Pro Nano) 3D Printer Model
The file '3FUN 3″ 3inch FPV Drone Frame And Canopy (naked Nebula Pro Nano) 3D Printer Model' is (stl,dxf,step,3mf) file type, size is 9.8MB.
The file '3FUN 3″ 3inch FPV Drone Frame And Canopy (naked Nebula Pro Nano) 3D Printer Model' is (stl,dxf,step,3mf) file type, size is 9.8MB.
High performance ultralight 3" Drone
Carbon frame is complex, the two dxf files are needed, use the pictures or 3D models to help you.
Tpu canopy for 14mm nebula pro nano camera and standart micro hd camera mount.
The frame is around 7g the canopy 4.5g
Recommended build :
No nut is requierd for the canopy, I recommend 8 metal nuts to secure the AIO.
FPV Cycle 1303 motors (M2 pressfit works great)
Good 25.5x25.5mm AIO
Gemfan 3016 and 3018 propellors.
2-3S 330-650 mah
Use rubber bands and ummagrip to hold the battery
(I'm using 20mm screws for a compact naked vista build)
A naked caddx vista is highly advised over a regular caddx vista for both low weight and low profile build in order to put an hd camera on top. Use kapton tape and some spacers (I use metal ones as tpu will melt.)
| 3Fun-V5-3D.stl | 499.8KB | |
| 3Fun-V5-Cut-Side.dxf | 79.2KB | |
| 3Fun-V5-UnCut-Side.dxf | 80.9KB | |
| 3Fun_3inch_FPV_Drone.step | 64.9MB | |
| 3ripCanompy.3mf | 335.8KB | |
| 3ripCanompy.step | 570.6KB | |
| 3ripCanompy.stl | 704.7KB | |
| Insta_360_GO2-holder-lowtilt.stl | 243.1KB |
