3DLAC/alcohol Holder 3D Printer Model
The file '3DLAC/alcohol Holder 3D Printer Model' is (stl) file type, size is 1.4MB.
The file '3DLAC/alcohol Holder 3D Printer Model' is (stl) file type, size is 1.4MB.
Holders for bottles of stuffs used around 3D printer. In my case, that is a can of 3DLAC and isopropyl alcohol. I have them attached to table legs so that they are easy to reach but do not take any extra space. Conveniently, two legs = two bottles.
This project file contains three different heights of the holder, 100/125/150mm, and five radiuses of bottles, 45/50/55/60/65mm. The one I use for 3DLAC is 50mm radius and 150mm high. Rule of thumb for me, bottle radius of the bottle -5mm is radius of the holder. It is a little stiff after printing, but loosens up a bit after a while.
The screw holes are for 4.5mm screw, 9mm head diameter and 3.5mm height.
| bottle_holder_R45_x_H100.stl | 841.0KB | |
| bottle_holder_R45_x_H125.stl | 761.2KB | |
| bottle_holder_R45_x_H150.stl | 761.2KB | |
| bottle_holder_R50_x_H100.stl | 836.4KB | |
| bottle_holder_R50_x_H125.stl | 760.6KB | |
| bottle_holder_R50_x_H150.stl | 760.6KB | |
| bottle_holder_R55_x_H100.stl | 846.6KB | |
| bottle_holder_R55_x_H125.stl | 756.6KB | |
| bottle_holder_R55_x_H150.stl | 756.6KB | |
| bottle_holder_R60_x_H100.stl | 825.7KB | |
| bottle_holder_R60_x_H125.stl | 761.2KB | |
| bottle_holder_R60_x_H150.stl | 761.2KB | |
| bottle_holder_R65_x_H100.stl | 816.7KB | |
| bottle_holder_R65_x_H125.stl | 757.3KB | |
| bottle_holder_R65_x_H150.stl | 757.2KB |