[3Dino Puzzle] Tyrannosaurus Ver.2.0 3D Printer Model Free Download

Description Files (52)

Summary

This model is set of Tyrannosaurus 3D puzzle and Platform, and upgraded version of the previously released "Classic Style T-Rex".
https://www.thingiverse.com/thing:5320464

This model is made with the same quality as my paid version of 3D puzzles.
The following points have been upgraded compared to the free model.
・Reproduction of the cut of the skull
・Sternum and pelvis are sculpted.
・Detail of ribs, spine and tail vertebrae

This set comes with a new type of platform. This platform is made so that the dinosaur puzzle and signboard can rotate 360 degrees. Adjust the angle freely to decorate.
The sides of the platform all have different shapes, so the way the pathway looks depends on how it is placed. If you place several of them, you can create your own dinosaur museum.

When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20~,40~ parts/packages, Tight applies to 30~,50~)
For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.

[Print Settings]
Rafts: No
Supports: No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Recommended company: RepRapper
Pitch(Layer height): 0.1mm - 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s

[3D Print Time]
{All}
Pitch 0.3mm: 4h41min
Pitch 0.1mm: 10h50min

{Tyrannosaurus}
Pitch 0.3mm: 2h31min
Pitch 0.1mm: 5h16min

{Platform}
Pitch 0.3mm: 2h08min
Pitch 0.1mm: 5h22min

101_Assembly_v7.stl	17.7MB
102_Head_Decoration-Part_v1.stl	1017.9KB
201_Package1_v4.stl	12.4MB
202_Package2_v3.stl	670.0KB
203_Package3_v3.stl	2.8MB
204_Package4_v2.stl	2.0MB
301_Package1_Tight_v2.stl	12.4MB
302_Package2_Tight_v2.stl	670.2KB
303_Package3_0.1mm_v3.stl	2.8MB
304_Package4_Tight_v2.stl	2.0MB
401_Head1_v5.stl	1012.4KB
402_Head2_v2.stl	19.4KB
403_Ribs1_v3.stl	85.8KB
404_Ribs2_v2.stl	88.4KB
405_Ribs3_v6.stl	89.3KB
406_Ribs4_v3.stl	90.1KB
407_Ribs5_v3.stl	91.1KB
408_Body_v5.stl	495.3KB
409_Lower-Back-1_v3.stl	40.9KB
410_Lower-Back-2_v1.stl	151.4KB
411_Joint_v1.stl	33.1KB
412_Stand1_v2.stl	3.6KB
413_Stand2_v2.stl	3.4KB
414_Neck_v1.stl	318.4KB
415_Arm_v1.stl	232.3KB
416_Left-Leg_v5.stl	132.2KB
417_Right-Leg_v2.stl	140.0KB
418_Tail-1_v3.stl	448.9KB
419_Tail-2_v1.stl	1.3MB
420_Signboard_v4.stl	568.9KB
421_Platform_v2.stl	2.0MB
501_Head1_Tight_v2.stl	1012.6KB
502_Head2_Tight_v2.stl	19.4KB
503_Ribs1_Tight_v2.stl	85.8KB
504_Ribs2_Tight_v2.stl	88.2KB
505_Ribs3_Tight_v2.stl	89.3KB
506_Ribs4_Tight_v2.stl	90.1KB
507_Ribs5_Tight_v2.stl	91.1KB
508_Body_Tight_v2.stl	493.1KB
509_Lower-Back-1_Tight_v2.stl	40.9KB
510_Lower-Back-2_Tight_v2.stl	151.6KB
511_Joint_Tight_v2.stl	33.3KB
512_Stand1_Tight_v2.stl	3.6KB
513_Stand2_Tight_v2.stl	3.4KB
514_Neck_Tight_v2.stl	318.4KB
515_Arm_Tight_v2.stl	232.3KB
516_Left-Leg_Tight_v2.stl	132.2KB
517_Right-Leg_Tight_v2.stl	140.0KB
518_Tail-1_Tight_v2.stl	448.9KB
519_Tail-2_Tight_v2.stl	1.3MB
520_Signboard_0.1mm_v3.stl	568.9KB
521_Platform_Tight_v2.stl	2.0MB

[3Dino Puzzle] Tyrannosaurus Ver.2.0 3D Printer Model

Summary

Tags

You might also like