This model is set of Parasaurolophus 3D puzzle and Platform, and upgraded version of the previously released "Classic Style Parasaurolophus".
https://www.thingiverse.com/thing:5423150

This model is made with the same quality as my paid version of 3D puzzles.
The following points have been upgraded compared to the free model.
・Reproduction of the cut of the skull
・Sternum and pelvis are sculpted.
・Detail of ribs, spine and tail vertebrae

This set comes with a new type of platform. This platform is made so that the dinosaur puzzle and signboard can rotate 360 degrees. Adjust the angle freely to decorate.
The sides of the platform all have different shapes, so the way the pathway looks depends on how it is placed. If you place several of them, you can create your own dinosaur museum.

When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20~,40~ parts/packages, Tight applies to 30~,50~)
For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.

[Print Settings]
Rafts: No
Supports: No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Recommended company: RepRapper
Pitch(Layer height): 0.1mm - 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s

[3D Print Time]
{All}
Pitch 0.3mm: 4h09min
Pitch 0.1mm: 9h27min

{Parasaurolophus}
Pitch 0.3mm: 1h25min
Pitch 0.1mm: 3h29min

{Platform}
Pitch 0.3mm: 2h08min
Pitch 0.1mm: 5h22min