[3Dino Puzzle] Classic Style Tylosaurus 3D Printer Model
The file '[3Dino Puzzle] Classic Style Tylosaurus 3D Printer Model' is (stl) file type, size is 8.2MB.
The file '[3Dino Puzzle] Classic Style Tylosaurus 3D Printer Model' is (stl) file type, size is 8.2MB.
This is 3D puzzle that classic style Tylosaurus.
Since there are only a few parts, 3D printing time is short and assembly is easy.
When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20~,40~ parts/packages, Tight applies to 30~,50~) For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.
[Print Settings]
Rafts:No
Supports:No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Pitch(Layer height): 0.1mm or 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s
[3D Print Time]
Pitch 0.3mm: 1h24min
Pitch 0.1mm: 2h:43min
| 101_Assembly_v12.stl | 6.7MB | |
| 102_Head_Decoration-Part_v1.stl | 1.0MB | |
| 103_Stand1_tylo-Hanging_v2.stl | 4.0KB | |
| 104_Stand2_tylo-Hanging_v2.stl | 3.8KB | |
| 105_Stand1_0.1mm_tylo-Hanging_v1.stl | 4.0KB | |
| 106_Stand2_0.1mm_tylo-Hanging_v1.stl | 3.8KB | |
| 201_Package1_v2.stl | 3.9MB | |
| 202_Package2_v5.stl | 2.7MB | |
| 301_Package1_0.1mm_v2.stl | 3.9MB | |
| 302_Package2_0.1mm_v3.stl | 2.7MB | |
| 401_Head1_v3.stl | 925.6KB | |
| 402_Head2_v2.stl | 20.2KB | |
| 403_Ribs1_v3.stl | 81.9KB | |
| 404_Ribs2_v4.stl | 79.6KB | |
| 405_Ribs3_v2.stl | 84.3KB | |
| 406_Ribs4_v2.stl | 81.9KB | |
| 407_Body_v5.stl | 344.6KB | |
| 408_Tail_v5.stl | 1.5MB | |
| 409_Stand1_v2.stl | 3.6KB | |
| 410_Stand2_v1.stl | 3.4KB | |
| 411_Plate_v1.stl | 259.2KB | |
| 412_Hand-Paddle_v4.stl | 579.3KB | |
| 413_Foot-Paddle_v2.stl | 551.9KB | |
| 414_Joint_v2.stl | 21.8KB | |
| 415_Lower-Back_v3.stl | 34.8KB | |
| 501_Head1_0.1mm_v2.stl | 925.6KB | |
| 502_Head2_0.1mm_v2.stl | 20.2KB | |
| 503_Ribs1_0.1mm_v2.stl | 81.9KB | |
| 504_Ribs2_0.1mm_v2.stl | 79.6KB | |
| 505_Ribs3_0.1mm_v2.stl | 84.3KB | |
| 506_Ribs4_0.1mm_v2.stl | 81.9KB | |
| 507_Body_0.1mm_v2.stl | 346.7KB | |
| 508_Tail_0.1mm_v3.stl | 1.5MB | |
| 509_Stand1_0.1mm_v2.stl | 3.6KB | |
| 510_Stand2_0.1mm_v2.stl | 3.4KB | |
| 511_Plate_0.1mm_v2.stl | 259.2KB | |
| 512_Hand-Paddle_0.1mm_v2.stl | 579.7KB | |
| 513_Foot-Paddle_0.1mm_v2.stl | 551.7KB | |
| 514_Joint_0.1mm_v2.stl | 21.8KB | |
| 515_Lower-Back_0.1mm_v2.stl | 34.8KB |