[3Dino Puzzle] Classic Style T-Rex 3D Printer Model
The file '[3Dino Puzzle] Classic Style T-Rex 3D Printer Model' is (stl) file type, size is 7.6MB.
The file '[3Dino Puzzle] Classic Style T-Rex 3D Printer Model' is (stl) file type, size is 7.6MB.
This is 3D puzzle that classic style Tyrannosaurus.
Since there are only a few parts, 3D printing time is short and assembly is easy.
[February 09, 2023]
↓New type T-Rex is now available!
https://www.thingiverse.com/thing:5844135
When 3D printing, it is convenient to use packaged STL models with all parts in one package.
STL models are available in two types: Regular and Tight.
(Regular applies to 20~,40~ parts/packages, Tight applies to 30~,50~) For "Regular", a pitch of 0.2-0.3 mm and a "Tight" setting of 0.1 mm are suitable. This is adjusted to match the surface roughness of the 3D printed part.
Depending on the maker of the filament, 3D printing with a setting of 0.1mm may be too tight to assemble. In such a case, 3D print the tight parts again with the same settings using the "regular" model.
[Print Settings]
Rafts:No
Supports:No
Infill: 20%
Nozzle: 0.4mm
Filament: PLA
Pitch(Layer height): 0.1mm or 0.3mm
Print speed: 60mm/s
Travel Speed: 100mm/s
[3D Print Time]
Pitch 0.3mm: 1h35min
Pitch 0.1mm: 3h:06min
| 101_Assembly_v7.stl | 6.9MB | |
| 102_Head_Decoration-Part_v7.stl | 926.0KB | |
| 201_Package1_v5.stl | 4.5MB | |
| 202_Package2_v3.stl | 2.4MB | |
| 301_Package1_0.1mm_v4.stl | 4.5MB | |
| 302_Package2_0.1mm_v3.stl | 2.4MB | |
| 401_Head1_v1.stl | 918.1KB | |
| 402_Head2_v3.stl | 20.2KB | |
| 403_Ribs1and3_v4.stl | 670.5KB | |
| 404_Ribs2_v5.stl | 1.2MB | |
| 405_Ribs4_v1.stl | 681.4KB | |
| 406_Body_v5.stl | 300.4KB | |
| 407_Lower-Back_v6.stl | 41.3KB | |
| 408_Tail_v7.stl | 695.6KB | |
| 409_Stand1_v2.stl | 3.6KB | |
| 410_Stand2_v3.stl | 3.4KB | |
| 411_Plate_v2.stl | 259.2KB | |
| 412_Arm_v6.stl | 113.1KB | |
| 413_Left-Leg_v2.stl | 122.0KB | |
| 414_Right-Leg_v1.stl | 119.4KB | |
| 501_Head1_0.1mm_v2.stl | 918.1KB | |
| 502_Head2_0.1mm_v3.stl | 20.2KB | |
| 503_Ribs1and3_0.1mm_v2.stl | 670.8KB | |
| 504_Ribs2_0.1mm_v2.stl | 1.2MB | |
| 505_Ribs4_0.1mm_v2.stl | 681.7KB | |
| 506_Body_0.1mm_v2.stl | 300.1KB | |
| 507_Lower-Back_0.1mm_v2.stl | 41.3KB | |
| 508_Tail_0.1mm_v2.stl | 695.6KB | |
| 509_Stand1_0.1mm_v2.stl | 3.6KB | |
| 510_Stand2_0.1mm_v2.stl | 3.4KB | |
| 511_Plate_0.1mm_v2.stl | 259.2KB | |
| 512_Arm_0.1mm_v2.stl | 113.1KB | |
| 513_Left-Leg_0.1mm_v2.stl | 122.0KB | |
| 514_Right-leg_0.1mm_v2.stl | 119.4KB |
