3DCR Double – Dual Extruder For Prusa I3 3D Printer Model
The file '3DCR Double – Dual Extruder For Prusa I3 3D Printer Model' is (stl) file type, size is 337.4KB.
The file '3DCR Double – Dual Extruder For Prusa I3 3D Printer Model' is (stl) file type, size is 337.4KB.
So here is a 3DCR version of dual extrusion for Prusa i3.
The 3DCR Double
Unique features:
-Nozzle to nozzle distance 20mm or 29.5mm (change without disassembly)
-Covers the whole 200x200mm heated bed at 20mm
-Fits directly to Prusa i3 X bars with LM8UU bearings
-Compatible with J-Head, MG Plus, E3D and other similar
-For 1,75 or 3mm filament (just change the PFTE tubes)
-Adjustable nozzle height
-Quick access dual nozzle holder for easy maintenance
-Easy X belt tension system for GT2 belt
-Cable management on the back
-Manual filament drive tension (direct drive)
-Reservations for accessories
-For nema17 motors
Notice
-The PFTE tubes are not in one piece. They are in two separate lenghts. The one from the motor to the hotend is just a guide for the filament.
(I dont think it will work with a one piece PFTE)
-The bearings I used are 624ZZ bearings
Enjoy and print multicolor with the 3DCR Double!
Also check out www.prenta.fi !
| 3DCR_Double_Extruder_idler_LEFT_v1.4.stl | 123.4KB | |
| 3DCR_Double_Extruder_idler_RIGHT_v1.4.stl | 123.4KB | |
| 3DCR_Double_Helper_Nut_v1.stl | 18.4KB | |
| 3DCR_Double_Motor_Union_5.0mm_v1.stl | 16.3KB | |
| 3DCR_Double_Motor_Union_6.0mm_v1.stl | 16.3KB | |
| 3DCR_Double_Motor_Union_6.7mm_v1.stl | 16.3KB | |
| 3DCR_Double_Nozzle_holder_20-29.5mm_v2.0.stl | 63.4KB | |
| 3DCR_Double_Nozzle_mount_20-29.5mm_v6.0.stl | 151.3KB | |
| 3DCR_Double_wire_helper_v1.stl | 76.6KB | |
| 3DCR_Double_X-Belt_tension_v2.stl | 39.1KB | |
| 3DCR_Double_X-Carriage_wBeltTension_v3.7.stl | 283.0KB | |
| 3DCR_Double_X-Motor_PFTE_mount_v8.1.stl | 193.1KB |
