3D Printed Tool Hanger 3D Printer Model
The file '3D Printed Tool Hanger 3D Printer Model' is (stl) file type, size is 123.4KB.
The file '3D Printed Tool Hanger 3D Printer Model' is (stl) file type, size is 123.4KB.
Made this modular tool holder to keep my tools (screewdrivers, hex drivers, calipers, pliers, hammer, etc.) organized on my desk.
It was designed to be installed on my office, in a 25 mm gap between two wood pannels, without fasteners. I added a backside hole later, so that the modules might also be wall mounted using some screws (actually I didn't test this method).
Instructions on how it was designed at https://www.instructables.com/id/3D-Printed-Tool-Hanger/
Did you know you can buy an Anet A8 only $165.99? Get yours at Gearbest:
http://bit.ly/2kqVOdO
| tool_hanger_caliper.stl | 31.5KB | |
| tool_hanger_hacksaw.stl | 86.2KB | |
| tool_hanger_hammer.stl | 50.3KB | |
| tool_hanger_hex_screwdriver.stl | 32.7KB | |
| tool_hanger_pliers.stl | 55.0KB | |
| tool_hanger_razor_blade.stl | 43.1KB | |
| tool_hanger_screwdriver.stl | 56.3KB | |
| tool_hanger_screwdriver_phillips.stl | 45.8KB | |
| tool_hanger_screwdriver_phillips_8.stl | 51.6KB | |
| tool_hanger_wrench.stl | 63.2KB |
