NOW AVAILABLE ON MY ETSY STORE! :D
https://bzqpstore.etsy.com
Hello!
I've been dreaming about making of Tali's Helmet for years. Finally I decided I'm profficient enough to pull it off!
Check out the full adventure (and assembly tutorial) on my Youtube:
Part 1:
https://youtu.be/fi-FgQYNNqM
Part 2:
https://youtu.be/B22pOmOu8SI
The Arduino code and electronics diagram for the blinking light can be found on my Arduino Project Hub:
https://create.arduino.cc/projecthub/bzqp/voice-activated-3d-printed-tali-s-helmet-48bfb8?ref=user&ref_id=1479266&offset=0
The model was based on two sources:
The files were designed and split for 3D printing. I also prepared a 3D-printable buck for vacuum forming of the visor and some small extras. The model was scaled for a generic, female head (56-60cm head circumference).
The files include:
Split helmet parts for 3D printing (for 180x180 buildplate):
-back_bottom_left
-back_bottom_right
-back_top_left
-back_top_right
-front_left
-front_right
-middle_bottom_left
-middle_bottom_right
-middle_top_left
-middle_top_right
All split parts in one STL file:
-tali_helmet_split
The whole, unsplit helmet:
-tali_helmet_whole
Emergency Induction Port (for transparent filament, with a hole for a straw):
-emergency_induction_port
Vacuum forming buck (without extra air tubes):
-buck_without_tubes
Vacuum forming buck (with extra air tubes):
-buck_with_tubes
Vacuum forming buck with tubes split for a 180x180 build plate:
-buck1
-buck2
-buck3
-buck4
Knob for the potentiometer in the back of the helmet:
-5mm_knobs_tight_and_loose
| 5mm_knobs_tight_and_loose.stl | 309.9KB | |
| back_bottom_left.stl | 438.7KB | |
| back_bottom_right.stl | 444.6KB | |
| back_top_left.stl | 753.7KB | |
| back_top_right.stl | 767.6KB | |
| buck1.stl | 339.3KB | |
| buck2.stl | 334.5KB | |
| buck3.stl | 275.6KB | |
| buck4.stl | 270.6KB | |
| buck_without_tubes.stl | 755.3KB | |
| buck_with_tubes.stl | 892.6KB | |
| emergency_induction_port.stl | 657.6KB | |
| front_left.stl | 1.3MB | |
| front_right.stl | 1.3MB | |
| middle_bottom_left.stl | 1.0MB | |
| middle_bottom_right.stl | 1.0MB | |
| middle_top_left.stl | 519.8KB | |
| middle_top_right.stl | 521.5KB | |
| tali_helmet_split.stl | 8.0MB | |
| tali_helmet_whole.stl | 7.2MB |
