3D Printed Syringe Pump Rack 3D Printer Model
The file '3D Printed Syringe Pump Rack 3D Printer Model' is (stl) file type, size is 177.3KB.
The file '3D Printed Syringe Pump Rack 3D Printer Model' is (stl) file type, size is 177.3KB.
http://www.instructables.com/id/3D-Printed-Syringe-Pump-Rack/
This instructable serves to document the build process of a 3D Printed Syringe Pump Rack. The rack is composed by 5 Syringe Pumps, with this set-up you can have 2 continuous flow systems and one remaining pump (if you have the proper tubing's and valves).
A Syringe Pump is normally used to gradually administer small amounts of fluid to a patient or for use in chemical and biomedical research. Normally they allow for infuse and withdraw capabilities.
Here are the main features of this particular 3D printed Syringe Pump Rack:
Open hardware/software
Extremely compact size ( 7cm movement range )
High precision lead-screw and nut
Low cost (300€ for the 5 syringes)
Simple to use (command line interface)
Simple to replicate
Check out the videos:
| cable_enclosure.stl | 2.2KB | |
| eletronics_enclosure_fixed.stl | 117.5KB | |
| motor_enclosure_fixed.stl | 144.4KB | |
| pump_body_fixed_1_1_scale.stl | 43.2KB | |
| pump_carrier_fixed.stl | 297.3KB | |
| syringe_holder_A_fixed.stl | 73.2KB | |
| syringe_holder_b_fixed.stl | 73.3KB |
