3D Printed Snowmobile 3D Printer Model
The file '3D Printed Snowmobile 3D Printer Model' is (stl) file type, size is 1.8MB.
The file '3D Printed Snowmobile 3D Printer Model' is (stl) file type, size is 1.8MB.
https://youtu.be/kxfUcySOHnQ
For a very long time, I had been trying to find a project that will challenge my CAD design skills. As the winter comes I come up with an idea to create a 3D printed snowmobile! Sound cool? Isn't it? I spend some time on drawing how it could look like then a looooot of time in Fusion360 and few days on printing. And here it is a really decent, quite big 3D printed snowmobile that I designed. I am proud of it, and hope you will like it :)
Here are the parts that I used:
Servo: https://bit.ly/3ArrpAk
Springs: https://goo.gl/8qZqHeX4
Radio: https://goo.gl/8qZqHe
Battery: https://goo.gl/8qZqHe
608ZZ bearing: https://goo.gl/H3qrS8 X4
623ZZ bearing: https://goo.gl/RynV6G X2
Most of the parts were printed on this printer: https://bit.ly/3mxIEuD
For this project, I used a custom Arduino board that I made, but that's the project that I am still working on so it isn't published anywhere. You can use any Arduino board with a DC motor controller instead of it.
| arm_left.stl | 155.9KB | |
| arm_right.stl | 155.3KB | |
| back_gear_connector.stl | 176.6KB | |
| damper_support_left.stl | 99.9KB | |
| damper_support_right.stl | 99.9KB | |
| electronics_flap.stl | 45.2KB | |
| fender.stl | 595.4KB | |
| front_shield.stl | 710.9KB | |
| Front_support_wheel.stl | 190.0KB | |
| Front_support_wheel_connector.stl | 166.4KB | |
| gearwheel.stl | 227.9KB | |
| left.stl | 262.1KB | |
| main_body.stl | 337.3KB | |
| right.stl | 237.7KB | |
| servo_arm.stl | 76.8KB | |
| skid.stl | 87.0KB | |
| skid_support.stl | 422.1KB | |
| Spur_Gear_18_teeth.stl | 457.6KB | |
| Spur_Gear_22_teeth.stl | 478.8KB | |
| steering_joints_connector.stl | 63.0KB | |
| steering_joint_left.stl | 41.1KB | |
| steering_joint_right.stl | 41.1KB | |
| Stretcher_wheel.stl | 509.5KB | |
| Stretcher_wheel_connector.stl | 167.9KB | |
| track.stl | 262.8KB |
