I Build an rc car base on Tarmo 5 and blending it with the DonkeyCar self-driving project.
Github:
https://github.com/crazy-luke/CrazyDonkeyTarmo/blob/main/README_EN.md
Assemble:
https://github.com/crazy-luke/CrazyDonkeyTarmo/blob/main/Hardwear_Car/CDT_Assemble.pdf
Printing:
https://github.com/crazy-luke/CrazyDonkeyTarmo/blob/main/Hardwear_Car/STL/README.md
| Bumper.stl | 99.5KB | |
| CHASSIS_Cover.stl | 154.0KB | |
| CHASSIS_Cover_body.stl | 154.0KB | |
| CHASSIS_Cover_rear.stl | 70.2KB | |
| CHASSIS_Cover_summer.stl | 231.1KB | |
| CHASSIS_Cover_window.stl | 51.1KB | |
| CHASSIS_Ext.stl | 523.5KB | |
| CONTROL_ARM_FIT.stl | 317.3KB | |
| Cover_rear_Light_L.stl | 49.0KB | |
| Cover_rear_Light_LH.stl | 57.0KB | |
| CrazyPowerBoard_Base.stl | 21.4KB | |
| CV_CAGE_Fit.stl | 2.5MB | |
| CV_GEAR_HOUSING_Fit.stl | 1.7MB | |
| CV_INNER_RACE.stl | 2.3MB | |
| CV_WHEEL_HOUSING_Fit.stl | 1.6MB | |
| END_CHASSIS_B04_Fit.stl | 1.3MB | |
| END_CHASSIS_B05.stl | 219.5KB | |
| END_CHASSIS_B06.stl | 150.3KB | |
| FRONT_AXLE_Fit.stl | 426.2KB | |
| FRONT_A_PLATE_Fit.stl | 224.0KB | |
| FRONT_BEARING_HUB_A05_Fit.stl | 1.3MB | |
| FRONT_BEARING_HUB_A06_Fit.stl | 1.3MB | |
| FRONT_B_PLATE.stl | 122.0KB | |
| FRONT_SUS_MOUNT_Fit.stl | 270.2KB | |
| FRONT_WHEEL_SPACER_Fit.stl | 58.1KB | |
| FSD_Bottom.stl | 133.1KB | |
| FSD_Cam.stl | 148.1KB | |
| FSD_Shell_cover.stl | 214.1KB | |
| FSD_Shell_cover_cn.stl | 582.3KB | |
| FSD_Shell_main.stl | 333.5KB | |
| GEARBOX.stl | 169.4KB | |
| GEARBOX_LID.stl | 208.1KB | |
| Light_Wire_Cover_H.stl | 32.7KB | |
| MAIN_GEAR_herringbone.stl | 1.5MB | |
| MAIN_GEAR_HUB.stl | 189.5KB | |
| MOTO_MOUNT_Fit.stl | 566.9KB | |
| PINION_GEAR_herringbone.stl | 3.2MB | |
| REAR_A_PLATE_FIT.stl | 160.6KB | |
| REAR_BEARING_HUB.stl | 350.5KB | |
| REAR_B_PLATE.stl | 103.2KB | |
| SHOCK_MOUNT_FRONT_Fit.stl | 137.1KB | |
| SHOCK_MOUNT_FRONT_LIGHT.stl | 125.0KB | |
| SHOCK_MOUNT_REAR_Fit.stl | 161.2KB | |
| STEERING_ARM_A07_FIT.stl | 366.8KB | |
| STEERING_ARM_A08_FIT.stl | 346.0KB | |
| STEERING_BAR_Fit_DS3225.stl | 54.9KB | |
| Steering_Link_Fit.stl | 2.4MB | |
| TORQUE_DAMPER_Fit.stl | 519.9KB |
