3D Printed RC Utility Boat 3D Printer Model
The file '3D Printed RC Utility Boat 3D Printer Model' is (stl,pdf) file type, size is 2.9MB.
The file '3D Printed RC Utility Boat 3D Printer Model' is (stl,pdf) file type, size is 2.9MB.
This 3D Printed RC Utility Boat is a large catamaran air boat powered by a brushless motor. The boat is designed to carry environmental and water quality monitoring equipment. It is capable of carrying a large payload inside the hull as well as on the optional modular deck system (not included in the STLs yet).
Specifications:
Overall length: 1,000 mm
Dry weight: 6 kg
Running weight: 7 kg
Payload capacity: 5 kg+
Maximum speed: ~20 km/h
All of the recommended print settings, bill of materials and more are included in the Build Guide PDF in thing files. This is the build video:
| 1._Hull_-_Section_Stern.stl | 294.7KB | |
| 10._Hull_-_Front_Hatch.stl | 53.8KB | |
| 11._Hull_-_Hatch_Clip.stl | 61.6KB | |
| 12._Drive_-_Motor_Mount_Left.stl | 322.5KB | |
| 13._Drive_-_Motor_Mount_Right.stl | 272.0KB | |
| 14._Drive_-_Motor_Mount_Clamp_Left.stl | 445.0KB | |
| 15._Drive_-_Motor_Mount_Clamp_Right.stl | 133.1KB | |
| 16._Drive_-_Rudder_Mount.stl | 121.2KB | |
| 17._Drive_-_Rudder_Left.stl | 85.2KB | |
| 18._Drive_-_Rudder_Right.stl | 84.5KB | |
| 19._Drive_-_Rudder_Linkage_Spacer.stl | 35.2KB | |
| 2._Hull_-_Section_1.stl | 409.8KB | |
| 20._Drive_-_Rudder_Linkage_Horn.stl | 35.4KB | |
| 21._Drive_-_Servo_Mount.stl | 191.0KB | |
| 22._Drive_-_Servo_Mount_Clamp.stl | 174.3KB | |
| 3._Hull_-_Section_2.stl | 254.2KB | |
| 4._Hull_-_Section_Bow.stl | 1.1MB | |
| 5._Hull_-_Tray_Support.stl | 171.0KB | |
| 6._Hull_-_Tray.stl | 603.0KB | |
| 7._Hull_-_Tube_Mount.stl | 459.9KB | |
| 8._Hull_-_Rear_Hatch.stl | 28.0KB | |
| 9._Hull_-_Rear_Hatch_Rail.stl | 684.0B | |
| Electroysnc_-_3D_Printed_RC_Boat_-_Build_Guide.pdf | 1.5MB |
