Rover built to maneuver offroad, with a quite unique "wheel" design.
Does NOT run well on tarmac/inside...
Really fun in the snow! Might work fine in the sand as well.
This is the parts I used to build this RC vehicle: (The motors are way overkill, this thing is brutal!)
2x ballbearing 3x8x3mm
2x motors
TURNIGY D2826-6 2200KV OUTRUNNER MOTOR
2x HOBBYKING 60A ESC 4A UBEC
Battery:
TURNIGY NANO-TECH 2200MAH 4S 25~50C LIPO PACK
1 remote control and receiver
zip ties
Microcontroller Teensy 3.2 (Can be built without)
I added the .stl files for the frame and "drum wheels" if you would like to adjust it to fit other motors etc in Fusion 360.
Video demonstration:
https://www.youtube.com/watch?v=rcgwzqsqfyA
| Back_frame.f3d | 360.2KB | |
| Back_frame.stl | 652.4KB | |
| Drumwheel_1.stl | 752.4KB | |
| Drumwheel_2.stl | 752.4KB | |
| Drum_wheels.f3d | 300.1KB | |
| Front_frame.stl | 349.7KB | |
| Outer_shell.stl | 2.7MB | |
| Side_frame_X2.stl | 69.8KB |
