3D Printed Raspberry Pi Spider Robot Platform 3D Printer Model
The file '3D Printed Raspberry Pi Spider Robot Platform 3D Printer Model' is (stl) file type, size is 1.1MB.
The file '3D Printed Raspberry Pi Spider Robot Platform 3D Printer Model' is (stl) file type, size is 1.1MB.
This is a fun beginner project for anyone to make! It is a four legged spider robot platform using Raspberry Pi as the brain, 3D printed parts as the body, and many readily available electronics from amazon or banggood. No custom PCB is required. With step-by-step video guides it is a good project for anyone who wants to tinker with Raspberry Pi, Python programming, 3D printing, and robotics.
Want to make this robot check out my Instructable:
https://www.instructables.com/3D-Printed-Raspberry-Pi-Spider-Robot-Platform/
Here is a video of it moving:
https://www.youtube.com/watch?v=c2HjScObrl8
Here is a video on how to set up the Raspberry Pi:
https://www.youtube.com/watch?v=kwKlcB907Zs
Here is a step by step video on building the robot:
https://www.youtube.com/watch?v=xK8-p0nnKv8
| Body.stl | 674.3KB | |
| Calf_1.stl | 48.9KB | |
| Calf_2.stl | 63.0KB | |
| Calf_3.stl | 73.9KB | |
| Calf_4.stl | 47.5KB | |
| Cover.stl | 88.1KB | |
| Joint_1.stl | 220.1KB | |
| Joint_2.stl | 234.4KB | |
| Joint_3.stl | 247.6KB | |
| Joint_4.stl | 218.5KB | |
| Pi_camera_mount.stl | 11.6KB | |
| Thigh_1.stl | 104.3KB | |
| Thigh_2.stl | 118.3KB | |
| Thigh_3.stl | 129.1KB | |
| Thigh_4.stl | 102.9KB | |
| Tip_glue.stl | 958.3KB | |
| Tip_smooth.stl | 723.0KB | |
| Ultrasonic_Sensor_mount.stl | 5.0KB |
