Students use 3D printed models as a substitute for more expensive and more dangerous parts in auto shop.
| 22RE_Block_-_No_Support_-_Scaled.stl | 16.3MB | |
| 22RE_Block_-_Scaled.stl | 16.3MB | |
| ac_mount_-_scaled.stl | 1.8MB | |
| ac_pulley_-_scaled.stl | 1.8MB | |
| camshaft1_-_scaled.stl | 523.9KB | |
| camshaft2_-_scaled.stl | 523.9KB | |
| cam_bearing_cap_-_scaled.stl | 152.4KB | |
| Cam_Gear_-_scaled.stl | 1.7MB | |
| compressor_-_scaled.stl | 3.3MB | |
| compressor_mount_-_scaled.stl | 200.4KB | |
| comp_back_cover_-_scaled.stl | 311.3KB | |
| connecting_rod_3mm_hole_-_scaled.stl | 2.0MB | |
| connecting_rod_cap_-_scaled.stl | 194.8KB | |
| crankend_-_scaled.stl | 364.0KB | |
| crank_1_-_scaled.stl | 1.7MB | |
| crank_1_mirror_-_scaled.stl | 1.8MB | |
| crank_2_-_scaled.stl | 1.8MB | |
| crank_gear_-_scaled.stl | 448.5KB | |
| crank_pulley_-_scaled.stl | 3.3MB | |
| crank_spacer_-_scaled.stl | 74.2KB | |
| Engine_stand_-_modified_to_accept_transmission.stl | 842.1KB | |
| exhuast_valves_-_scaled.stl | 374.7KB | |
| fanspacer_-_scaled.stl | 55.9KB | |
| FAN_-_scaled.stl | 5.8MB | |
| fan_clutch_-_scaled.stl | 5.8MB | |
| fan_pulley_-_scaled.stl | 2.9MB | |
| Flywheel_-_scaled.stl | 1.5MB | |
| gears_helical_16.stl | 27.8KB | |
| gears_helical_16r.stl | 95.0KB | |
| gears_helical_30x10.stl | 130.4KB | |
| gears_helical_30x10r.stl | 130.6KB | |
| Header_-_scaled.stl | 1.7MB | |
| head_-_ported_-_scaled.stl | 9.5MB | |
| head_-_scaled.stl | 34.5MB | |
| HEAD_BRACE_-_scaled.stl | 11.5MB | |
| Intake_Manifold_Lower_-_Scaled.stl | 3.2MB | |
| Intake_manifold_upper_-_part_1_-_scaled.stl | 8.5MB | |
| Intake_manifold_upper_-_part_2_-_scaled.stl | 5.0MB | |
| Intake_manifold_upper_-_scaled.stl | 2.9MB | |
| intake_valve_-_scaled.stl | 375.8KB | |
| left_motor_mount_-_scaled.stl | 863.6KB | |
| LITINCTELessonPlan-Automotive-EngineDesign.pdf | 1.3MB | |
| main_cap_-_scaled.stl | 946.1KB | |
| oil_cap_-_scaled.stl | 1.4MB | |
| oil_filter_-_scaled.stl | 2.6MB | |
| oil_pan_-_scaled.stl | 685.5KB | |
| piston_-_scaled.stl | 4.9MB | |
| Rear_Main_-_scaled.stl | 2.1MB | |
| Right_motor_mount_-_scaled.stl | 905.3KB | |
| rocker_arm_3mm_hole_-_scaled.stl | 1.0MB | |
| spacer_.125_-_scaled.stl | 33.9KB | |
| spring_retainer_-_scaled.stl | 164.4KB | |
| stand_-_scaled.stl | 3.5MB | |
| Throttle_body_-_Scaled.stl | 1010.6KB | |
| Throttle_Linkage_-_scaled.stl | 38.1KB | |
| timing_cover_-_scaled.stl | 4.6MB | |
| VALVE_COVER_-_scaled.stl | 6.1MB |
