3D printed bottle cabinet
After placing the kitchen, there was a remaining space next to the fridge. After some experimenting with different solutions, mainly constructions of PVC, 3D printing turned out to be a nice option.
The parts are connected to each other by means of a shelf carrier and the upper one is connected to the cabinet by means of a bolt that passes through the shelf.
The bottom one has an angle of 30 degrees because the shelf of the cupboard was made that way. Incidentally, this ensures that the entire unit is securely locked in the cupboard.
There is an upper, lower and intermediate part.
The spacer can be copied until the required height is reached
| Flessenkast_Boven.stl | 352.6KB | |
| Flessenkast_Onder.stl | 395.1KB | |
| Flessenkast_Tussen.stl | 551.2KB |
