3d Printable Turbojet Engine 3D Printer Model
The file '3d Printable Turbojet Engine 3D Printer Model' is (stl) file type, size is 41.1MB.
The file '3d Printable Turbojet Engine 3D Printer Model' is (stl) file type, size is 41.1MB.
The 3D Printable Jet Engine is great! However, I wanted a turbojet or low bypass turbofan to complement the original. So, I got to work designing the turbojet, afterburner and variable exhaust nozzle.
Nozzle link: https://www.thingiverse.com/thing:6710947
This conversion uses fewer screws than the original! It adds an additional compressor stage, making the model longer and thinner. The design philosophy matches the original, with hints of the GE J79 visible in the inlet.
I designed a stand. Making the jet sit low to the ground. It works great!
Stand link: https://www.thingiverse.com/thing:6710955
I made a video and written instructions for assembly. ( Video is more thorough).
Video: https://www.youtube.com/watch?v=q-FUjxFJqak
Written: https://www.printables.com/model/952835-3d-printable-turbojet-engine
My print profile uses three colors, but feel free to unleash your creativity.
If you don't yet have the hardware for the Jet Engine, I offer a great kit on my website. It provides all the needed parts and greatly supports my work. Thank you.
https://linus3d.de/products/jet-engine-components-kit
Check out the Afterburner & Variable Nozzle!
Happy printing and great success! Message me with any questions!
| 1st_LPC.stl | 3.2MB | |
| 1st_LPC_Stator.stl | 630.2KB | |
| 2nd_LPC.stl | 577.2KB | |
| 2nd_LPC_Stator.stl | 656.4KB | |
| 3rd_LPC.stl | 604.7KB | |
| 3rd_LPC_Stator.stl | 576.8KB | |
| 4th_LPC.stl | 600.8KB | |
| Combustion_and_HPT_Casing_Rev_B.stl | 1.8MB | |
| Combustion_Lining_Rev_B.stl | 5.1MB | |
| Compressor_Shaft.stl | 1.5MB | |
| Fuel_Injector_No_Supports.stl | 272.2KB | |
| HPC_Stage1_Rev_B.stl | 2.4MB | |
| HPC_Stage_2_Rev_B.stl | 2.3MB | |
| HPC_Stage_3_Rev_B.stl | 2.2MB | |
| HPC_Stage_4_Rev_B.stl | 2.2MB | |
| HPC_Stage_5_Rev_B.stl | 3.0MB | |
| HPC_Stator_Stage_1_Rev_B.stl | 1.2MB | |
| HPC_Stator_Stage_2_Rev_B.stl | 2.4MB | |
| HPC_Stator_Stage_3_Rev_B.stl | 2.3MB | |
| HPC_Stator_Stage_4_Rev_B.stl | 2.5MB | |
| HPC_Stator_Stage_5_Rev_B.stl | 2.6MB | |
| HPT_Rev_B.stl | 3.4MB | |
| HP_Core_Casing_Rev_A.stl | 5.5MB | |
| HP_Spool.stl | 1.5MB | |
| IGV.stl | 1.3MB | |
| LPC_Casing.stl | 1.8MB | |
| LPT_Casing.stl | 1.8MB | |
| LPT_Spool.stl | 938.8KB | |
| LPT_Stage_1_Rev_B.stl | 5.0MB | |
| LPT_Stage_2_Rev_B.stl | 4.9MB | |
| LPT_Stage_3_Rev_B.stl | 5.0MB | |
| LPT_Stage_4_Rev_B.stl | 5.1MB | |
| LPT_Stator_Stage_1_Rev_B.stl | 3.5MB | |
| LPT_Stator_Stage_2_Rev_B.stl | 3.3MB | |
| LPT_Stator_Stage_3_Rev_B.stl | 1.8MB | |
| LPT_Stator_Stage_4_Rev_B.stl | 3.2MB | |
| LP_Spool_AFT_Rev_B.stl | 958.7KB | |
| LP_Spool_Connector_Rev_B.stl | 2.2KB | |
| Nose_Cone.stl | 4.2MB | |
| Nozzle.stl | 1.4MB | |
| Nozzle_Section_Rev_B.stl | 5.9MB | |
| Shaft.stl | 438.3KB | |
| Swirl_Dome_Plate_Rev_A.stl | 470.7KB |
![Specimens With Gauge Length Five Times The Diameter [E8M] 3D Printer Model](https://cdn.3axis.co/assets/ae/bc/cf/35/aebccf35-03cd-4da1-992f-62420a3495a2/images/75f1d63f-1551-4a64-a171-fb8c6ea0e55e_thumb.jpg)
