Description Files (33)

Summary

Main Description

This contains all the tiles for a game like Settlers of Catan. The naming convention provides the suggested print-color, the number of copies to print (e.g. "x3").

Core Tiles

interior tiles (brick ×3, wood ×4, sheep ×4, wheat ×4, ore ×3 and desert ×1)
perimeter port tiles (three 3:1 ports, along with brick, wood, sheep, wheat, and ore 2:1 ports)
three blank corner water perimeter pieces (semi-optional)
six blank water perimeter pieces (semi-optional, especially if you have the fish expansion pack tiles below).

Expansion Packs
Fish
- six fish perimeter pieces which can be used to replace the six blank side water perimeter pieces (blue_x6_water4.stl). The Makerbot 2 had some troubles printing the originals, so the _v2 versions may remedy that by moving the pips below the numbers so that they actually touch. The _v3 versions remove some errant pieces that poked through the bottom.
5-6 player expansion pack includes
- two more each of brick, wood, sheep, wheat, and ore tiles
- one more desert tile
- two more of the 4-slotted water pieces (blue_x6_water4.stl) to be placed on the 2 side of the 2-3 3-1 port and on “8” side of the 1-2 3:1 port
- a copy of the 1-2 3:1 port (catan_blue_x1_water_1-2_three-to-one_port.stl) to be placed on the 7 side of the 6-7 wheat 2:1 port
- a copy of the 5-6 player sheep port (catan_blue_x1_water_9-1_sheep_port_5-6_player_expansion.stl)
  
  Notes
I'm currently in the process of getting these printed, and I hope to have a full game-board picture to post when they're finally finished. The current full-game image is a rendering from Blender.
A previous iteration had a lot of trouble printing the wheat-bundles (at least on the Makerbot 2 I was using). My first task is to get those printing a little better.
The _v2 ore tile fixes a strange non-manifold issue (I understood that TinkerCAD shouldn't even be able to create non-manifold surfaces)
The _v2 wood tile and port thickens the axe handle which didn't print at all on the port tile, and was a little flimsy on the main tile.
I've had a lot of fun making these. If you successfully print them yourself, I'd love to hear about it @Gumnos

base_tile.stl	11.2KB
base_tile_with_chip.stl	23.7KB
blue_x3_water3.stl	5.6KB
blue_x6_water4.stl	7.5KB
catan_black_x3_ore_tile.stl	204.5KB
catan_blue_x1_fish-10.stl	150.9KB
catan_blue_x1_fish-10_v2.stl	190.8KB
catan_blue_x1_fish-4_v4.stl	184.1KB
catan_blue_x1_fish-5.stl	151.0KB
catan_blue_x1_fish-5_v2.stl	186.9KB
catan_blue_x1_fish-6.stl	155.7KB
catan_blue_x1_fish-6_v2.stl	192.5KB
catan_blue_x1_fish-8_v3.stl	191.5KB
catan_blue_x1_fish-9.stl	153.1KB
catan_blue_x1_fish-9_v2.stl	189.9KB
catan_blue_x1_water_1-2_three-to-one_port.stl	110.3KB
catan_blue_x1_water_2-3_three-to-one_port.stl	110.9KB
catan_blue_x1_water_3-4_brick_port.stl	129.2KB
catan_blue_x1_water_4-5_wood_port.stl	175.6KB
catan_blue_x1_water_4-5_wood_port_v2.stl	187.6KB
catan_blue_x1_water_5-6_three-to-one_port.stl	114.0KB
catan_blue_x1_water_6-7_wheat_port.stl	3.3MB
catan_blue_x1_water_6-7_wheat_port_v2.stl	192.8KB
catan_blue_x1_water_7-8_ore_port.stl	139.2KB
catan_blue_x1_water_8-9_three-to-one.stl	118.7KB
catan_blue_x1_water_9-1_sheep_port.stl	144.8KB
catan_blue_x1_water_9-1_sheep_port_5-6_player_expansion.stl	149.4KB
catan_brown_x4_wood_tile_v2.stl	85.4KB
catan_green_x4_sheep_tile.stl	118.2KB
catan_red_x3_brick_tile.stl	39.5KB
catan_white_x1_desert_tile.stl	246.3KB
catan_yellow_x4_wheat_tile.stl	9.7MB
catan_yellow_x4_wheat_tile_v2.stl	305.2KB

3D Printable Tiles For A Game Like Settlers Of Catan 3D Printer Model

Summary

Main Description

Core Tiles

Expansion Packs

Notes

Tags

You might also like