3D Printable RC Airplane. 3D Printer Model
The file '3D Printable RC Airplane. 3D Printer Model' is (obj,stl) file type, size is 572.8KB.
The file '3D Printable RC Airplane. 3D Printer Model' is (obj,stl) file type, size is 572.8KB.
I created this fully 3d printed airplane just to make something cool. With a 36 inch wingspan, 4 servos, and a 210w motor this is a fully functional flying airplane.
Parts:
4 - 25mm x 3mm or 1 inch #4-40 machine screws + respective bolts
4 - 40mm x 6mm or 1.5 inch x 1/4 inch bolts
8 - 6mm or 1/4 inch washers
4 - 10mm x 4mm or 1/2 inch x #6 machine screws + respective bolts
4 - 1/8 inch x 3/8 inch x 2 foot basswood or (untested) 1/8 inch x 1/4 inch x 2 foot basswood
piano wire or paperclips
rubber bands
glue (abs + acetone recommended for an abs print)
sandpaper
RC parts:
I used:
1 - TURNIGY Plush 30amp Speed Controller
1 - D2830-11 1000kv Brushless Motor
1 - ZIPPY Compact 2200mAh 3S 25C Lipo Pack
4 - Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo
As well as a battery charger and 4 channel transmitter/reciever
.
As a poor college student, if you are viewing this and work for a cool company i would love to hear from you about any possible employment. :)
| Airplane_cover.obj | 11.9KB | |
| Airplane_cowl.obj | 102.3KB | |
| Airplane_landing.obj | 312.7KB | |
| Airplane_shortened_simple_back.obj | 226.1KB | |
| Airplane_shortened_simple_front.obj | 245.7KB | |
| Airplane_shortened_simple_tail.obj | 33.4KB | |
| Airplane_tail_flaps_larger.obj | 95.5KB | |
| Airplane_tail_larger.stl | 579.2KB | |
| Airplane_tail_upper_larger.stl | 438.8KB | |
| Airplane_wing_left_aileron.obj | 22.5KB | |
| Airplane_wing_left_base.obj | 100.8KB | |
| Airplane_wing_left_middle.obj | 65.2KB | |
| Airplane_wing_left_servo.obj | 72.5KB | |
| Airplane_wing_left_tip.obj | 71.7KB | |
| Airplane_wing_right_aileron.obj | 22.7KB | |
| Airplane_wing_right_base.obj | 101.2KB | |
| Airplane_wing_right_middle.obj | 65.1KB | |
| Airplane_wing_right_servo.obj | 74.0KB | |
| Airplane_wing_right_tip.obj | 72.0KB |
