3D Printable Grass 3D Printer Model
The file '3D Printable Grass 3D Printer Model' is (stl) file type, size is 3.8MB.
The file '3D Printable Grass 3D Printer Model' is (stl) file type, size is 3.8MB.
Why grow your own lawn (or Easter Grass), when you can simply print it?
Here's a collection of different sizes of grass tiles, which are easy to print and can be cut to length (60mm full length. Can be scaled longer, but only in the direction on the strands!!).
New updated sizes, 75x75mm double density tile, pictured with the boat from Monopoly and a thin 25x150mm one.
As with any "hairy" print, these are printed sideways, and then one of the plates is cut free. The parts should be oriented so, that each strand starts printing from the top of the grass and ends on the root (Cura changes this when you rotate the block 180 degrees on the Z axis).This way you get a nice effect, where the grass is thinner on the top, and adheres better to the bottom plate. You can choose, if you want to have a thick bottom plate or the thin one, by simply orienting the parts accordingly and cutting the opposite plate off.
Toss a like, post a make and maybe follow me over at the IG's
| 100x100mm_Grass.stl | 2.6MB | |
| 100x150mm_Grass.stl | 3.8MB | |
| 150mm_Round_Grass.stl | 4.6MB | |
| 150x150mm_Grass.stl | 5.8MB | |
| 25x150mm_Grass.stl | 1.4MB | |
| 50x100mm_Grass.stl | 1.3MB | |
| 50x150mm_Grass.stl | 1.9MB | |
| 50x50mm_Grass.stl | 657.1KB | |
| 75x75mm_Dense_Grass.stl | 5.8MB |
